Commercial

0800 7723586 / 01254 492043

RESIN BOUND PAVING FOR COMMERCIAL PROJECTS

Resin Bound paving for a Commercial surfacing project?


Resin Install regularly works with trade and commercial companies offering a service for Resin Bound paving. Are you enquiring on behalf of or are you the following.

  • Building, paving or groundworks company
  • local council
  • landscape architect
  • highway department
  • quantity surveyor
  • Quote for or looking to fill a tender contract.


Our teams are equipped for working on large areas such as carparks, Private roads, Housing estates, High pedestrian areas such as footpaths and footbridges etc. Our resin bound installers can quickly install 350sq.meters in one working day, and even more if required. Our teams regularly work on a subcontract basis for some of the largest resin bound supply companies in Europe.


Resin Install has a range of resin bound systems suitable for commercial schemes and projects that require a more natural-looking aggregate finish. Our methods can be applied to a concrete or asphalt/tarmac bases or Mot for recycled rubber and stone bound.


Our BBA Approved Resin Bound surfacing systems produce a seamless surfacing finish which is fully porous and SuDS compliant if installed on top of a porous surface such as open textured tarmac base.


Our expert resin bound installation teams are fully trained in all aspects of health and safety and carry CSCS certification.  At Resin Install we can also offer a complete groundworks package if required.

Commercial resin bound paving

What are the benefits of resin bound surfacing for commercial use?


Strength: The load-bearing strength of the underlying layer (usually composed of tarmac or concrete) means that Resin Bound surfacing is perfect for large traffic areas such as car parks, private roads, and public walkways.


Fast setting time: When the public is relying on a surface to be ready within a short time frame, it’s essential that surfacing can be installed and available to use promptly. Resin Bound surfacing boasts a rapid setting time and usually is ready to be used by the next day.


Attractive looks: The charming appearance of natural stone is far more eye-catching than the dull greyness of concrete or tarmac. And with a variety of stone colours available, it’s easy to find the right shades to suit a surface and its use.


No-Fading: Unlike tarmac that loses it's jet back colour after a few years and starts to look worn and tired unless a new seal coat is added. Resin Bound keeps its colour for over 15 years with a yearly power wash. The polyurethane resins used protects the stone from UV degradation, so your new surface will continue to look brand new.


Non-slip: In high traffic areas, of both drivers and walkers, a suitable grip must be obtainedable in icy weather. The stone texture of Resin Bound surfacing offers excellent friction to keep the public safe when travelling across it.


Porous - SuDs compliant: Water can easily seep through the stone matrix of a resin bound surface, which helps deter flooding. It also has the advantage of allowing easy passage of water to plant roots, allowing them to flourish and grow even when surrounded by the stone surfacing.


What does the UK Government say?

You will not need planning permission if a new or replacement driveway of any size uses permeable (or porous) surfacing which allows water to drain through, such as gravel, permeable concrete block paving or porous asphalt, or if the rainwater is directed to a lawn or border to drain naturally.
If the surface to be covered is more than five square metres planning permission will be needed for laying traditional, impermeable surfaces that do not provide for the water to run to a permeable area.

Commercial resin bound paving carpark

Commercial Resin Bound Vs Resin Bonded. What is the difference?


here are two types of conventional external resin surfacing systems, with very similar names, often confused. The crucial thing to remember is one is permeable, and the other is non-permeable.


Resin bonded’ is sometimes also used as a generic term for both systems. This can be misleading since the systems are very different.

Resin Bound: Resin Bound surfacing mixes stone, quartz or marble and a clear polyurethane resin it is then hand trowelled onto a solid sub base, the size of the stone for this system ranges from 1mm to 12mm, and every particle is entirely encapsulated in resin.


Resin Bond: Resin Bound surfacing is made up of dry aggregate, which is scattered onto a resin base, with the excess swept off, to create a more rough, impermeable Typical stone size for this system ranges from 1mm to 6mm and can often become loose.

Commercial resin bound paving 1
Commercial resin bound paving
Commercial resin bound paving resin install team
Commercial resin bound paving install team
Commercial resin bound paving car park
Commercial resin bound paving parking
Commercial resin bound paving car park
resin install on the job
resin bound Commercial paving car park
Commercial resin bound paving
Commercial resin bound paving
Commercial resin bound paving foot path
Commercial resin bound paving resin install
Commercial resin bound paving car park complete
Commercial resin bound paving on the job
Commercial resin bound paving during install
resin bound Commercial paving
resin bound Commercial paving car park 2
resin bound Commercial paving car park complete

Resin

InstallLtd

Resin Install, 13 Railway Rd,Darwen BB3 2RG, United Kingdom

0800 772 3586

(01254) 492043

OPENING HOURS


Monday - Friday: 09:00 to 19:00

Saturday: 09:00 to 17:00

Sunday: Closed

We are Installers of Resin drives, Paths and patios, Wet pour and rubber mulch for properties across Lancashire, Manchester, Merseyside, Yorkshire, Cheshire and beyond. Resin Bound Driveways. Low Maintenance, High-Quality Resin Surfaces, Free Quotes. Trade and Public Welcome 0800 7723586 / 01254 492043